Re-Imaging Computers Checklist

 

*SCCM will not offer PXE boot if the following settings are not correct*

 

  1. Verify that the BIOS is configured properly:

 

  1. UEFI Secure Boot on.

 

  1. Integrated NIC:
    1. Enable UEFI Network Stack should be checked
    2. Enabled w/PXE
  2. SATA Operation set to AHCI.

 

  1. TPM Security:
    1. TPM On
    2. Enabled

 

  1. Delete Computer from the SCCM Console.

 

  1. Reset AD account for that object.

 

  1. Turn on machine and pull up Boot Menu.

 

  1. Choose Onboard NIC (IPV4).

 

  1. Pick your Task Sequence.

 

  1. Type in the Hostname.

 

  1. Run the Task Sequence.

 

 

*Active Directory will not allow SCCM to overwrite an AD object. The result will be that the machine will image but will not add to the domain while the Task Sequence is run*