1. Open the FileBrowser App
2. Tap on the “+” near the top left-hand corner of the screen
3. Select “Manual Setup”
4. Most default settings are OK, change the following settings:
“Address” – S Drive: \\hnas1-evs1\speced$\ N Drive: \\hnas1-evs1\speced$\home\username
“Username” – Select Edit then have the user enter their KKI username
“Password”— Select Edit then have the user enter their KKI Password
“Display Name” – N Drive or S Drive for their respective drives.
“Advanced Settings” – Change “Auto List Shares” to OFF
5. Press “Save” in the top right-hand corner of the screen
6. The drive will appear on the left-hand side of the screen under “remote,” tap on the drive and you will be connected to your network drive. If you get an error message, make sure that the address is entered in correctly and that your username and password is correct.
**If you would like to have access to their N Drive and their S Drive, you will need to repeat these steps for both drives**